In this article and video how to program the Keyless Vehicle Module (KVM) on Land Rover LR4 models is shown using Autologic's DrivePRO
Begin by identifying the vehicle you are working on
Select Automatic Detection
Confirm vehicle information is correct. Select Ok
Select Module Programming and Replacement
Enter VIN for the vehicle you’re working on
Select Ok
Read and understand the warning
Select Yes to continue
The module programming guide is available on the Autologic website
Select Ok
Locate the module you wish to program. In this example we are programming the Keyless Vehicle Module (KVM)
Select Next
Select Keyless Vehicle Module (KVM)
For new control modules select Yes, for updating existing modules, select No
In this example we are programming a new module. Select Yes
For fitted modules, select Yes. For modules that have not been fitted, select No. Fitted refers to installed
In this example, we will select Yes
Please make sure Hazard switch is on, this keeps the Body Control Module awake during the procedure
Select Ok
Turn the ignition to position 2
Select Ok
Press Continue to start KVM Programming
Enter VIN
Select Ok
Enter VIN
Select Ok
Please send the listed Orders to Autologic using the Download Manager
Select Ok
Select DrivePRO
Select Module Programming & Order Manager
Select Send Orders
Select the order for the vehicle you’re working on
Confirm the information is correct, and select Send
Select Ok
The order is sent. You will receive an email when your programming file is ready
From the Module Programming & Order Manager screen, select Download Orders
Select Install next to the order for the module you’re programming
When the download has successfully applied, Select Ok
Select the Back arrow
Select Back arrow again to return to the DrivePRO home screen
Navigate to Module Programming and Replacement
Enter VIN
Select Ok
Read and understand the warning
Select Yes
The module programming guide is available on the Autologic website
Select Ok
Locate the module you wish to program
Select Next
Select Keyless Vehicle Module, KVM
For new control modules, select Yes. For updating existing control modules, select No. In this example, we are programming a new module. Select Yes
For fitted modules, select Yes. For modules that have not been fitted, select NO. Fitted refers to installed. In this example, we will select Yes
Please make sure Hazard switch is on, this keeps the Body Control Module awake during the procedure
Select Ok
Turn the ignition to position 2
Select Ok
Press Continue to start KVM Programming
When programming is complete, you will receive a message stating the programming has been completed successfully
Select Ok
