contact us

BMW Z4 ABS Sensor Lateral Acceleration Sensor - How to Code and Initialize

See how to code and initialize the lateral acceleration sensor on BMW Z4 models using the OPUS | IVS (Autologic) DrivePRO

In this video and article, coding and initializing the lateral acceleration sensor on BMW Z4 models using the OPUS | IVS (Autologic) DrivePRO is shown

When replacing the Transverse Acceleration Sensor in BMW Z4 vehicles, you will have to code and adjust the new sensor.

Begin by identifying the vehicle you’re working on

Select BMW

Select Determine Vehicle

Confirm vehicle information is correct, and select Continue

Select Coding

Select Code

Select Next

Locate ABS with DSC

Select ABS with Automatic / Dynamic Stability Control (ABS/ASC/DSC)

Follow steps

Cycle ignition
Select Code

Coding has been completed

Follow steps

Turn off the ignition and wait 10 seconds
Turn on the ignition
Read faults and carry out functional check

For ABS with DSC, carry out end of line test and sensor adjustment. Select Ok

Select Chassis

Select Dynamic Stability Control (DSC)

Select lateral acceleration sensor

Select Adjust

Coding and adjusting is now complete